SPECIFICATIONS
Directed model | 600/4 |
RMS continuous power per channel, All channels | 75 |
driven into 4 ohms from 20 to 20,000 Hz, with less | watts |
| |
than 0.08% Total Harmonic Distortion @ 14.4 VDCC |
|
RMS continuous power per channel, All channels | 20/125 |
driven into 2 ohms from 20 to 20,000 Hz, with less | watts |
than 0.1% Total Harmonic Distortion @ 14.4 VDC |
|
RMS continuous power, | 250x2 |
into 4 ohms from 20 to 20,000 Hz, with less than | watts |
0.1% Total Harmonic Distortion @ 14.4 VDC |
|
Dynamic power rating | 600 |
into 4 ohms | watts |
Frequency Response
Damping Factor @ 4 ohm
Crossover
Bass Equalization
Input Impedance
Input Sensitivity
Output Impedance
Supply Voltage
Fusing and Power
Minimum Cable Requirements (AWG) (Per amp, trunk mounted)
Greater than 95 dB
Greater than 100
Switchable high or low pass 12 dB/octave, continuously variable from 50 to 500Hz
+8 dB, centered at 40Hz
20K ohms
Variable from 150 mV to 8 volt
2 to 8 ohms, stereo
4 to 8 ohms, bridged
10 to 16 VDC
50A
#8
© 2003 Directed Electronics, Inc | 13 |