Directed Electronics 500 owner manual Specifications, model

SPECIFICATIONS

model	200	500
RMS continuous power per channel, All channels	35	75
driven into 4 ohms from 20 to 20,000 Hz, with less	watts	watts
than 0.08% Total Harmonic Distortion @ 14.4 VDCC
RMS continuous power per channel, All channels	50	120
driven into 2 ohms from 20 to 20,000 Hz, with less	watts	watts
than 0.1% Total Harmonic Distortion @ 14.4 VDC
RMS continuous power, 2-channel operation, bridged	100x2	240x2
into 4 ohms from 20 to 20,000 Hz, with less than	watts	watts

0.1% Total Harmonic Distortion @ 14.4 VDC

Dynamic power rating (IHF-202 Standard) bridged into 4 ohms

Signal-to-Noise Ratio

Frequency Response

Damping Factor @ 4 ohm

Crossover

250600

watts watts

Greater than 95 dB

20-20,000 Hz ± 0.5 dB

Greater than 200

Switchable high or low pass 12 dB/octave, continuously variable from 50 to 500Hz

Bass Equalization	+8 dB, centered at 40Hz
	(model 500 only)
Input Impedance	20K ohms
Input Sensitivity	Variable from 150 mV to 8 volt
Output Impedance	2 to 8 ohms, stereo
	4 to 8 ohms, bridged
Supply Voltage	10 to 16 VDC
Fusing and Power	25A	50A
Cable Requirements (AWG)	#12	#8
(Per amp, trunk mounted)

8 © 1999 Directed Electronics, Inc