MULTIPLE AMPLIFIER COMBINATIONS

The Viper d2500.1 subwoofer amplifiers can also be used in multiples of the Parallel Synced Gain combination allowing for unlimited expansion to a systems subwoofer section. To use multiples of the Parallel Synced Gain combination the following directions must be adhered to for best results.

„Audio signal - Divide the head unit or processor audio signal to the master amplifier by using RCA Y adapters. Be sure to divide them an even number of times to ensure the input level at each master amplifier is matched.

„Remote Sub Level Control - The Remote Sub Level Control cable can be divided several times to connect to each master amplifier. This can

be accomplished by using one or more Directed Remote Sub Level cable splitters. Standard single-to- double phone line splitters and accessories from a local electronics store can also be used.

For systems with more than two master/slave combinations, use multiple single-to-double splitters. Do not use phone splitters that divide the signal more than once per splitter or splitters designed for multiple uses.

„Amplifier configuration - When using multiple Parallel Synced Gain amplifier combinations follow the instructions in the Parallel Synced Gain section of this guide for each individual combination.

© 2002 Directed Electronics, Inc

15