SPECIFICATIONS
Viper model d2500.1
RMS continuous power driven into 4 ohms from 20 to 250 Hz @ 14.4 VDC at rated power/load.
RMS continuous power driven into 2 ohms from 20 to 250 Hz @ 14.4 VDC at rated power/load.
Dynamic power rating
Signal-to-Noise Ratio
Frequency Response
Damping Factor
Crossover
Subsonic Filter
Bass Equalization
Input Impedance
Input Sensitivity
Output Impedance Supply Voltage Fusing and Power
Minimum Cable Requirements (AWG) (+) 12 Volt (Per amp, trunk mounted)
Minimum Cable Requirements (Ground)
1500 watts
0.8% THD
2500 watts
1.0% THD
2700 watts
Greater than 80 dB
20-250 Hz +0, -1 dB
50 (typical)
Switchable 24 dB/ octave, variable from 20 to 250 Hz
Variable 0 to +12 dB, centered at 40Hz
20K ohms
Variable from 150 mV to 8 volt
2 to 4 ohms
10 to 16 VDC
200A
#0 Battery to fuse block #4x2 Fuse block to amplifier
#4x2 Amplifier to chassis
© 2002 Directed Electronics, Inc | 19 |