Directed Electronics K10 manual system features menus, feature descriptions

system features menus

Feature	Default LED ON Setting	LED OFF Setting
Number	(Press Channel 1)	(Press Channel 2)
1	Active arming	Passive arming
2	Chirps ON	Chirps OFF
3	Ignition-controlled door lock ON	Ignition-controlled door lock OFF
4	Ignition-controlled door unlock ON	Ignition-controlled door unlock OFF
5	Active locking	Passive locking
6	Ignition-controlled domelight ON	Ignition-controlled domelight OFF
7	0.8 second door lock pulses	3.5 second door lock pulses
8	Double pulse unlock OFF	Double pulse unlock ON
9	Security features ON	Security features OFF
10	Code Hopping ON	Code Hopping OFF

feature descriptions

1 ACTIVE/PASSIVE ARMING: When active arming is selected, the starter kill will arm (if connected) only when the transmitter is used. When set to passive arming, the starter kill will arm (if connected) 30 seconds after the ignition key is turned off.

2 CHIRPS ON/OFF: This feature controls the chirps that confirm arming and disarming of the system. A siren or horn must be connected to the H1/10 BROWN wire.

3 IGNITION CONTROLLED DOOR LOCK ON/OFF: When turned on, the doors will lock three seconds after the ignition is turned on.

4 IGNITION CONTROLLED DOOR UNLOCK ON/OFF: When turned on, the doors will unlock when the ignition is turned off.

5 ACTIVE/PASSIVE LOCKING: If passive arming is selected in Feature 1, then the system can be pro- grammed to either lock the doors when passive arming occurs, or only lock the doors when the system is armed with a transmitter. Active locking means the doors will not lock when the system passively arms. Passive locking means that the doors will lock whenever the system passively arms the starter kill (if connected).

6 IGNITION CONTROLLED DOMELIGHT: If turned on, the system will turn on the domelight for 30 sec- onds when the ignition is turned off. The domelight supervision output (H1/4) wire must be connected to an optional relay as described in the Primary Harness Wire Connection Guide.

7 DOOR LOCK PULSE DURATION: Some European vehicles, such as Mercedes-Benz and Audi, require longer lock and unlock pulses to operate the vacuum pump. Programming the system to provide 3.5 second pulses will accommodate the door lock interface in these vehicles. The default setting is 0.8 sec- ond door lock pulses.

11