Directed Electronics K10 manual primary harness H1 wire connection guide

primary harness (H1) wire connection guide

primary harness (H1) wiring diagram

The primary harness supplied with this unit is the standard 12-pin harness used. Two wires in the plug are not used. The upgrade from this unit to a security system would simply require unplugging and exchanging control units and connecting the necessary wires to the vehicle. The functions of all the wires that are used in the primary harness are outlined in the following wiring diagram and the wire con- nections are described in the wire connection guides.

H1/1	___	ORANGE	(-) 500 mA Armed Output
	___
H1/2		WHITE	(-) Light Flash Output
	___
H1/3		WHITE/BLUE	(-) 200 mA Channel 3 Validity Output
	___
H1/4		BLACK/WHITE	(-) 200 mA Domelight Supervision Output
	___
H1/5		GREEN	No Function
	___
H1/6		BLUE	(-) 200 mA Second Unlock Output
	___
H1/7		VIOLET	No Function
	___
H1/8		BLACK	(-) Chassis Ground Input
	___
H1/9		YELLOW	Switched Ignition Input
H1/10	___
		BROWN	(-) Horn Honk Output
H1/11	___
		RED	(+) Constant Power Input
H1/12	___
		RED/WHITE	(-) 200 mA Channel 2 Validity Output

primary harness wire descriptions

H1/1 ORANGE (-) Ground-When-Armed Output

This wire supplies a (-) 500 mA ground as long as the system is armed. This output ceases as soon as the system is disarmed. The orange wire is pre-wired to control the starter kill relay.

NOTE: if using the H1/1 Orange wire to activate an add-on accessory such as window automation, pager or voice module a 1Amp diode must be installed to ensure proper operation. Insert the diode as shown in the following diagram.

Important! Never interrupt any wire other than the starter wire.

4