ON/OFF CONTROL
Press and hold the ( 
) button on the LCD screen or momentarily press the POWER button ( 
)on the remote.
FUNCTION MODE (MENU)
Press the MENU button ( 
) on the LCD screen or the VIDEO MENU button on the remote to display the following setup options:
COLOR
BRIGHTNESS
DIMMER (on/off)
FORMAT (full, normal, and zoom)
RESET (restore factory default settings)
Use the MENU button ( 
) on the LCD screen or use the VIDEO MENU button on the remote to scroll through the menu options. Once the desired setting is select- ed use the UP/DOWN (S/T) buttons on the LCD screen or the MONITOR (S/T) buttons on the remote to change the setting. After
DOOR LIGHT ON/OFF
Press this switch on the LCD screen to have the door open sensor operate the dome lights.
NOTE: This feature is operational only if the Gray or Purple door lock trigger wires have been connected to the door sensor.
The dome light selector switch contains two separate circuits. One for a positive dome light trigger and one for a negative dome light trigger. Please refer to the wiring table below for each of these triggers.
NEGATIVE DOME LIGHT TRIGGER
WIRE COLOR | CONNECTION |
|
|
Gray | Battery ground |
|
|
Blue | Battery +12VDC |
|
|
Orange | Battery +12VDC |
|
|
Purple | Negative door trigger |
|
|
14 | © 2004 Directed Electronics, Inc. |
