Learn Routine will be exited if:
■Door is closed.
■Ignition is turned off.
■Program switch is pressed too many times.
■More than 15 seconds between steps.
transmitter configurations
The transmitters can be programmed with the standard or single button arm/disarm configurations by using the
Auto Learn functions in the Transmitter/Receiver Learn Routine.
standard configuration
A remote that uses the standard configuration operates similarly to many factory keyless entry remotes. A stan- dard configuration transmitter allows arming, disarming, and Panic Mode activation with separate buttons. When programmed for standard configuration, the transmitter buttons are assigned to the following functions:
button configuration
..................................... | operates | ...........................Arm/Lock, |
|
| Panic ON/Panic OFF |
.................................... | operates | ...........................Disarm/Unlock/ |
|
| panic off |
.................................... | operates | ...........................Remote start |
..................................... | operates | ...........................Channel |
|
| release |
and | operate | 3 hr Timer Mode |
and | operate | 24 hr Timer Mode |
and | operate | ..........................Short Run/Turbo |
|
| timer |
and | .......................operate............................Temperature |
..................................................................................Control Start | |
37
