1995 and newer vehicle anti-theft systems (immobilizers)

1995 and newer vehicle anti-theft systems (immobilizers) require a bypass module. The bypass module allows for easy interfacing, while still maintaining the OEM system’s integrity.

passlock I and passlock II (PL-1 and PL-2)

The Passlock I and Passlock II systems can be found in the following General Motors vehicles:

‘95 and newer Cavalier and Sunfire

‘96 and newer Achieva, Grand Am, and Skylark

‘97 and newer Intrigue, Malibu, and Cutlass

‘98 and newer trucks, vans, SUVs

‘99 and newer Alero

2000 and newer Impala and Saturn

Passlock I and II systems are VATS-evolved. Passlock systems still rely on the R-code to start, but the pellet is no longer placed in the key. The resistor can now be found in the key switch. This allows for a greater number of possible R-codes. In addition, Passlock systems require “seeing” the correct R-code at the correct time. To bypass Passlock I and II, p/n 555L is required.

passkey III (PK-3), transponder-based systems

The Passkey III system can be found in the following vehicles:

‘97 and newer Park Avenue

‘98 and newer Cadillac

‘99 and newer U vans, Transport, Montana, and Silhouette

2000 and newer Grand Prix, Lesabre, Monte Carlo, Lumina, Bonneville

2001 and newer Aurora, Aztek and Rendezvous

Other transponder-based systems include: Acura, BMW, Dodge/Chrysler/Jeep, Ford, Honda, Infinity, Mazda, Mercedes, Mitsubishi, Nissan, Toyota, Volkswagon, and Volvo.

PK-3 and the transponder-based systems use a transponder system that locks out the ignition and fuel system. This transponder system is comprised of two parts. The first part, the transceiver, circles the key switch and is activated when the key is placed in the key switch or turned to the run position. Upon activation, the trans-

31

Page 31
Image 31
Directed Electronics SR6000 manual Passlock I and passlock II PL-1 and PL-2, Passkey III PK-3, transponder-based systems