Super Systems Inc. Page 30 SDS Data Logger Manual #4565 Rev D
The top of the screen displays the codes for the ranges. The codes are:
0 – 20MV 1 – 40MV 2 – 80MV 3 – 160MV 4 – 1.28V 5 – 2.56V
Below is a listing of the suggested ranges for the various TC types.
TC Type mV Range Chart TC Type Range in mV
B 20
C 40
E 80
J 80
K 80
N 80
NNM 80
R 40
S 20
T 20
To select a board to calibrate, highlight the first line (“Board number to cal (1 to 8)”), enter the desired
board number that will be calibrated, then press Enter. The next line is the TCs (CH = Channels) to
calibrate. If there is a Y next to the TC, then it will be calibrated. If there is an N, then the TC will not