Description of Template Manager Screen Fields
This section will describe the Template Manager screen fields and list any constraint for the fields.
Field Name | Description |
| Maximum # of Characters |
Template Name | The name of the template |
| 22 |
Company Name | The company’s name |
| 40 |
Furnace ID | The Id of the furnace |
| 17 |
Furnace Make/Model | The make/model of the furnace |
| 22 |
Furnace Dimensions | The height, length, and width of the furnace | 15 | |
Temp Type | The type of temperature |
| 1 (F or C) |
| (Fahrenheit or Celsius) |
|
|
Temperature Range | The low and high range of the furnace |
| 10 |
Furnace Type | The type of furnace being surveyed |
| 20 |
Furnace Use | What the furnace is used for |
| 15 |
Furnace Class | The class of the furnace |
| 1 |
| (Version 1.101.0.80 & above) |
|
|
Notes | Any additional notes desired |
| 63 |
|
|
| 61 for 1.101.0.76 & above |
Sample Interval | The sample rate for the survey |
| N/A |
| (Version 1.101.0.71 & below only) |
|
|
Survey Duration | The duration of the survey in minutes |
| 3 |
Survey Tolerance | The survey tolerance/uniformity required |
| 2 |
Simulated Load | The simulated load in lbs |
| 5 |
Setpoint | The survey setpoint |
| 4 |
Operator | The operator performing the survey |
| 20 |
Specification | The specification the survey meets |
| 25 |
Number of TCs | The total # of TCs |
| 2 |
TC Type | The type of TC |
| 3 |
|
|
| |
Super Systems Inc. | Page 94 | SDS Data Logger Manual #4565 Rev D | |
