Figure 2.10 Report Properties Thermocouples Tab
Figure 2.11 Spool Correction screen
All values displayed to the users are corrected. That means if there is a defined offset for the TC Spool and a channel offset, the user would be shown the net result of those offsets into the value displayed.
There are checkboxes for a possible forty thermocouples, but only the active thermocouples will have checks in the checkboxes. Clicking on the “Define Control TC” link will allow the user to select the TC or TCs that will be the control TC(s) (figure 2.12). The operator can select any of the thermocouples to be the control TC(s) and provide an optional description for that TC.
Super Systems Inc. | Page 44 | SDS Data Logger Manual #4565 Rev D |
