Active TCs Tab

Figure 3.23 Active TCs Tab

This tab contains information about the active TCs such as the number of TCs used, the Gauge of the TC, the TC type, spool serial number, spool correction, and a check box for each of the TCs. There is also a check box to allow the user to use the active settings for the TCs or to individually select the TCs to use on the SDS instrument. Checking “Use these active TC settings” will set the checked TCs.

Super Systems Inc.

Page 92

SDS Data Logger Manual #4565 Rev D

Page 92
Image 92
SSI America 8040, 8020 manual Active TCs Tab