Appendix A – Standard Calibration Range
Ranges used for the following thermocouples for certification are listed below unless otherwise specified by the customer. Calibration and certification of the instrument are performed based on customer specifications. For instrument calibration procedures, see section SDS 8020/8040 Data Logger → Keypad Assignments → 22. Input Calibration and section SDS 8020/8040 Data Logger → Keypad Assignments → 23. Cold Junction Trim.
Thermocouple Type | Range in °F | |
B | 100 | - 3300 |
C | 32 | - 4200 |
E | - 1800 | |
J | - 2100 | |
K | - 2500 | |
N | - 2300 | |
NNM | 32 | - 2500 |
R | 32 | - 3200 |
S | 32 | - 3200 |
T | - 750 | |
Super Systems Inc. | Page 97 | SDS Data Logger Manual #4565 Rev D |
