Using Special Features
FORWARD AND REVERSE PICTURE SEARCH
While in Play mode, press REW or FF; to resume
normal viewing, press PLAY button.
FORWARD AND REVERSE JET SEARCH
While in Play mode, press and hold REW or FF; Jet Search increases the tape speed 7 times if recorded at SP speed or 21 times for tapes recorded at SLP speed. To resume normal view- ing, release the button.
NOTE: While in Forward or Reverse Jet Search, audio is muted.
STILL AND FRAME ADVANCE
While in Play mode, press STILL/SLOW to stop on a single still frame. Press STILL/SLOW again to advance picture frame by frame. To resume normal viewing, press PLAY.
Note: Using Still mode for more than five minutes stresses the tape and causes undue stress on the video heads; the VCR automatically disengages Still mode after five minutes have elapsed.
SLOW MOTION PLAYBACK
Press STILL/SLOW for more than two seconds for SLOW Motion Playback.
Cleaning and Care
■Disconnect the VCR from the power source before cleaning.
■Do not use liquid or aerosol cleaners on or in the VCR.
■Use a dry cloth to dust the VCR.
■Keep the remote control with the VCR and secure it in such a manner that it is unlike- ly to be lost or damaged.
■Keep liquids away from the VCR. A spill on the VCR can damage the electronics and cause electric shock or fire.
VIDEO HEAD CLEANING
If poor playback qualities (snow, distortion, streaking, etc.) develop and persist, the unit’s videoheads may need cleaning. If necessary, purchase a head cleaning cassette. Do not clean the heads excessively.
When using a head cleaning cassette, read all instructions carefully; incorrect head cleaning can permanently damage the video heads.
IMPORTANT!DO NOT INSERT ANY OBJECTS INTO THE CABINET SLOTS; CONTACT WITH A VOLTAGE POINT INSIDE THE VCR CAN CAUSE DANGEROUS SHOCK OR MAY SHORT OUT PARTS AND CAUSE FIRE OR ELECTRIC SHOCK.
12 | © 2001 Directed Electronics, Inc. |
