Directed Video DV2600 manual To Detach the Front Panel to RE-INSTALLTHE Front Panel

TO DETACH THE FRONT PANEL TO RE-INSTALLTHE FRONT PANEL

1.Press OPEN; the front panel will fold down.

2.Press the RELEASE button (9) on the back- side of the front panel and pull outward.

3.For safekeeping, store the front panel in the supplied protective case immediately after removing.

4.Push the front metal plate up to the main body. A click sound will be heard.

1.Place the front panel into its opening and firmly press on both ends until a click is heard.

2.If the front panel fails to lock in position properly, the display panel and buttons may not operate properly. Press OPEN, then re-install the front panel again.

PRECAUTIONS WHEN HANDLING

1.Do not drop the front panel.

2.Do not put pressure on the display or con- trol buttons when detaching or re- installing the front panel.

3.Do not touch the contacts on the front panel or on the main unit body. It may result in poor electrical contact.

4.If any dirt or foreign substances adhered on the contacts, they can be removed with a clean, dry cloth.

5.Do not expose the front panel to high tem- peratures or direct sunlight.

6.Keep any volatile agents (e.g. benzene, thinner, or insecticides) from touching the surface of the front panel

7.Do not attempt to disassemble the front panel.

10 © 2001 Directed Electronics, Inc.