SECURITY (ESP/ESP2 ONLY)

NOTE: This menu contains selections that have addi- tional settings.

ESP/ESP2 programming and zone information. TRIGGER INFORMATION - Displays ESP/ESP2 zone information. (Always displays the last zone triggered only.) See the Assign Trigger Names menu.

SYSTEM SETTINGS - Displays the System Settings menu. See the System Settings menu.

SETUP (MCB1000 ONLY)

NOTE: This menu contains selections that have additional settings. This menu is used for initial system setup only.

Change hardware settings and rename zones. HARDWARE OPTIONS - Displays the Hardware Options menu. See the Hardware Options menu. ASSIGN SOURCE NAMES - Displays the Source Names menu. See the Source Names menu for a list of names.

ASSIGN TRIGGER NAMES - Displays the Trigger Names menu. See the Trigger Names menu.

IMPORTANT!Any changes in the following menus must be written into the MCB1000 and ESP/ESP2 software. Before the menu is exited the “write to system” procedure must be completed.

SYSTEM SETTINGS MENU

SELECTION

DESCRIPTION AND OPERATION

PASSIVE/ACTIVE ARMING

Program the ESP/ESP2 security system to arm by itself

(passive)

 

 

or if its remote must be used for arming (active). For a

 

full description of this setting refer to your ESP/ESP2

 

owner’s guide.

CHIRPS ON/OFF

This feature will turn the arming and disarming chirps

 

on/off. For a full description of this setting refer to the

 

ESP/ESP2 owner’s guide.

IGNITION LOCK ON/OFF

When turned on, the doors will lock three seconds after

 

the ignition is turned on. For a full description of this

 

setting refer to the ESP/ESP2 owner’s guide.

IGNITION UNLOCK ON/OFF

When turned on, the doors will unlock when the ignition

 

is turned off. For a full description of this setting refer

 

to the ESP/ESP2 owner’s guide.

PASSIVE/ACTIVE LOCKING

This feature controls whether the doors will lock when

 

the ESP/ESP2 security system passively arms itself. For a

 

full description of this setting refer to your ESP/ESP2

 

owner’s guide.

10

© 2001 Directed Electronics, Inc.

Page 10
Image 10
Directed Video RVM560 manual System Settings Menu, Security ESP/ESP2 only