Installation

MONITOR SPECIFICATIONS

RVM 560

 

 

Screen size

5.6"

 

Resolution

74,880 pixels

 

View angle

Top 10 degrees

 

 

Bottom 30 degrees

 

 

Left 45 degrees

 

 

Right 45 degrees

 

Video system

ntsc/pal

 

 

 

 

Osd language

English

 

Power requirements

10 - 15 vdc

 

Operating temp.

35 - 115 degrees

 

 

fahrenheit

RVM 680

 

 

Screen size

6.8"

 

Resolution

89,856 pixels

 

View angle

Top 10 degrees

 

 

Bottom 30 degrees

 

 

Left 45 degrees

 

 

Right 45 degrees

 

Video system

ntsc/pal

 

Osd language

English

 

Power requirements

10 - 15 vdc

 

Operating temp.

35 - 115 degrees

 

 

fahrenheit

RVM 700

 

 

Screen size

7.0"

 

Resolution

112,320 pixels

 

View angle

Top 60 degrees

 

 

Bottom 30 degrees

 

 

Left 60 degrees

 

 

Right 60 degrees

Video system

ntsc/pal

Osd language

English

Power requirements

10

- 15 vdc

Operating temp.

35

- 115 degrees

 

fahrenheit

INSTALLING THE MONITOR

All monitors that work with the OHC100 attach to the monitor door in the same way.

■Start with the monitor door in the viewing position.

■At both bottom corners of the monitor are spring-loaded monitor mounts. Place one of these against the mounting bracket (2) and guide the other end of the monitor into the bracket on the other side of the monitor.

■Tilt the monitor up into the mount and press firmly until a click is heard. The con- nector at the back of the monitor is self- guiding and will connect automatically to the monitor connector (4).

■The Hot Foot adapter is for use with the MMS1 Universal Monitor Mounting Pedestal. Place the Hot Foot adapter mounting plate onto the monitor connector and secure using the provided machine screws.

REMOVING THE MONITOR

■With the monitor door in the viewing position, press the monitor release button

(1). At the same time, gently tilt the top of the monitor down. Firmly hold the monitor while pressing to one side and pull away from the monitor door.

14

© 2001 Directed Electronics, Inc.