DirecTV MDTV6 PROGRAMMING OTHER DEVICE CONTROL

Hughes Net.Sys./TiVo 1142 (program under DIRECTV mode)

model GXCEBOT

Philips/TiVo 1142 (program under DIRECTV mode)

model DSR6000R

RCA UltimateTV 1492 (program under DIRECTV mode)

model DWD490RE

Sony/TiVo 1639 (program under DIRECTV mode)

model SAT-T60

Sony UltimateTV 1739 (program under DIRECTV mode)

model SAT-W60

PROGRAMMING OTHER DEVICE CONTROL

The DIRECTV® Universal Remote Controlis also prepro-

grammed to operate an RCA TV,an RCA VCR,and a

Pioneer audio receiver.To control devices other than the

default brands,perform the following steps;otherwise

skip this section:

NOTE:To control a DVD/DVR player,program the VCRke y.

For TV/VCR Combo control,skip this section and perform the

instructions on the next page.

1. Turn on a device and,if applicable,insert a

video cassette or DVD.

NOTE:Please read steps 2 through 4 completely before

proceeding.Highlight or write down th e codes and

device you wish to program before moving on to step 2 .

2. On the DIRECTV Universal Remote Control,

press the device key you wish to program once

(e.g.,TV,VCR,or AUX).Press and hold Setup

until the selected device key blinks twice and

then release Setup.

3. Use the Manufacturer’s Codes(starting on

page14) to locate the four digit number

corresponding to the brand name ofthe device

you want to control.Enter the first four-digit

code for your device. If performed cor rectly,the

light under the select device key will blink twice.

NOTE:If the selected device key emits a long blink,

the code is invalid.Repeat steps 2 through 3 and try

entering the same code again.

continued on next page...

DirecTV Mnl MDTV6 3/21/03 2:04 PM Page 11