DirecTV MDTV6 SEARCHING FOR YOUR CODE

SEARCHING FOR YOUR CODE

Ifyour TV,VCR, DIRECTV® Receiver,or auxiliar y device

does not respond to the DIRECTV Universal Remote

Controlafter trying all of the codes listed for your brand,

or ifyour brand is not listed at all, try searching for

your code.

For example,to search for a code for your TV:

1. Turn on your TV.

2. On the DIRECTV Universal Remote Control,

press TV once.Then press and hold Setup until

the TVkey blinks twice, then release Setup.

3. Enter 9- 9 - 1.The TVkey will blink twice.

4. Aim the remote control at the TV and slowly

alternate between pressing Power and TV.

Stop when the TV turns off.

NOTE:In the search mode,the DIRECTV Universal

Remote Control will send IR codes from its library to

the selected device,starting with the most popular

code first.

5. Press Setup once to lock in the code.

6. To search for the codes ofyour other devices,

repeat steps 1 through 5,but substitute the

appropriate key (i.e.,VCR,AUX,or SAT) for the

device you are searching for.

DirecTV Mnl MDTV6 3/21/03 2:04 PM Page 23