Dish Network 625, 942, VIP622 Switching Between TV and Device Volume Adjustment, Remote Controls

222.book Page 67 Tuesday, July 25, 2006 1:30 PM

Remote Controls

Controlling Other Components

Switching Between TV and Device Volume Adjustment

When the remote control is setup to operate your TV, the VOLUME and MUTE buttons adjust your TV volume. If you prefer the volume and mute functions of the remote to adjust the volume of a remote-controllable audio receiver or amplifier instead of the TV, this capability can be set up using the AUX mode of the remote control.

To set the remote to control the device’s volume (steps 1-5 set up the remote and steps 6-7 make sure the remote works correctly):

To set the remote back to control the TV volume (steps 1-5 set up the remote and steps 6-7 make sure the remote works correctly):

Programming to Control a Second Satellite Receiver

If you have another DISH Network satellite receiver installed, you can use this remote in AUX mode to control it along with your new receiver. When you program the remote to control this other receiver, the remote will send out IR and UHF (not UHF Pro) signals to the receiver. You can program the remote to control any other DISH Network satellite receiver, except for following:

•TV2 on DISH 322, ViP222, ViP622 DVR, DISH Player-DVR 522, 625 and 942

•DishPlayer 7100/7200

67