CONTROLS
BLADE DRIVE:
•Located on control panel to operator’s right.
To engage blade: Pull up on switch.
To disengage blade: Push down.
CIRCUIT BREAKER:
•Located on control panel to operator’s right.
•Protection of the electrical system is by (1) 15 amp circuit breaker.
•If circuit breaker trips, push button to reset.
•If this condition repeats, consult dealer for inspection and repair.
MOWER DECK CUT HEIGHT LIFT LEVER:
•Located to the right and front of operator.
•Controls the cutting height.
•Seven positions of adjustment.
•Depress trigger and move lever forward to lower deck.
•Depress trigger and pull lever back to raise deck.
NOTE: Always use high position for transport.
19
