OPERATION INSTRUCTIONS
DECK ROLLERS (60” deck):
Purpose: | The spring loaded deck rollers located |
| at the front corners of the 60” mower |
| deck are designed as an aid to limit turf |
| scalping when mowing on uneven ground. |
Height: | Normal height settings as installed at |
| the factory allows each roller to ride |
| slightly above the turf. This setting |
| should prove ideal under most mowing |
| conditions. |
Adjustment: | Some mowing applications may require |
| lowering of each front roller. To lower |
| the roller, remove the pin, spring, |
| washers and spacer (P/N 9789) from |
| the top of roller bracket tube. Remove |
| roller bracket from tube. Slide spacer |
| P/N 9789 on roller bracket shaft and |
| reassemble using washer, spring and |
| pin at the top. |
Lubrication: | The use of a penetrating oil or light |
| grease on the roller bracket shafts |
| will keep roller moving freely. |
32
