CARE AND MAINTENANCE

CAUTION

Hot oil may cause burns. Allow

engine to cool before draining oil.

 

CHANGING THE ENGINE OIL:

1.The “Dapco” oil drain valve is located on the left side of the engine crankcase.

2.Place a suitable container under the drain valve. The fitting of a short piece of hose will help direct the oil.

3.To drain, turn hex head valve stem counter-- clockwise with 10mm wrench or socket. Open to full open (approximately 7 turns).

4.After engine is drained, tighten hex stem.

NOTE: Refer to engine manufacturer’s recommendations for frequency of oil changes.

Hex Head Valve Stem

38

Page 38
Image 38
Dixon 13089-0601 manual Changing the Engine OIL