Dixon 8000 Series manual Specifications

SPECIFICATIONS

Specifications go here

		8000 Series
CHASSIS:	11 GA - rectangular tube
BODY:	Folded sheet metal.
SEAT:	Designed for operator comfort with padded back and arm rests. Seat is adjustable
	fore and aft.
MOWER DECK:	2 Decks are available. Both decks are made of 10 GA fabricated welded
	construction with 7 -" GA reinforcement plate. 3 blades combine for either a 60"
	or 72" cut width. Cut height approximately 1.5" to 6" via 11 position lift handle.
BLADE DRIVE:	Electric clutch
DRIVE SYSTEM:	Each rear wheel is independently driven by a HydroGear BDA pump and White
	CE wheel motor.
ENGINE:	25HP Kohler Command, 4-Cycle, V-Configuration, Overhead Valve, Air-
	Cooled, Gasoline, Vertical Shaft, Aluminum Head, and Crankcase with Cast Iron
	Liners, Full Pressure Lubrication/Full Flow Filter, Pulse-type Fuel Pump, Fixed
	Jet Carburetor w/Smart-Choke, Electronic Ignition, In-Line Fuel Filter, Dual
	Element Air Cleaner.
STARTING SYSTEM:	Electric by key switch operation with safety interlocks on parking brake and blade
	drive clutch.
TIRES:	Front	13-6.5x6
	Rear	23-10.5x12
RECOMMENDED	Front	12 lbs.
TIRE PRESSURE:	Rear	12 lbs.
CAPACITIES:	Fuel - 11.5 gallons (approx)
	Hydrostat oil tank - 4 quart with in-line 40 micron filter
	Hydrostat oil recommendation, refer to page 36
	Engine - 2 qts. SAE 10W30 (with filter)
DIMENSIONS:	Width	73.5"(60" Deck), 85.5"(72" Deck)
	Height	54"
	Length	87"
	Weight	1020 lbs.(60" Deck), 1054 lbs.(72" Deck)
NOTE:	Additional information provided in service instructions under the individual
	component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

11