Dixon 8000 Series new instructions & graph- ics. no dipstick, Lubrication, Care And Maintenance

Models: 8000 Series

1 39
Download 39 pages 27.8 Kb
Page 25
Image 25
LUBRICATION:

CARE AND MAINTENANCE

LUBRICATION:

A.Engine: Follow engine manufacturer's recommendation.

B.Deck spindles: Lubricate with 3 "shots" only, every 100 hours.

C.Hydrostatic transmission and filter (follow instructions listed below).

Dirt or water in oil can ruin the hydrostatic transmissions.

CHECKING & REPLENISHING OIL IN HYDRO- STATIC TRANSMISSION

Check the oil level in hydrostatic transmission oil reservoir after every 25

hours of usage. Clean

the oil reservoir cap and the area around it prior to

removal. Check the oil level on the dipstick.

The proper oil level

should register between the marked hole on the dipstick and the end of the dipstick. Replenish as needed with 20W-50 Motor Oil. DO NOT OVERFILL. When

checking

the oil level, be very careful to keep the reservoir clean.

Change the oil in the reservoir and hydrostat transmission oil filter after the

first 100 hours of

use. Then every 500 hours after that. Remove the

filter and be sure all oil has drained from the

reservoir. Replace with new

filter and 20W-50 Mobil Super II.

 

 

Oil Reservoir Cap

 

Dipstick

Fuel

Cap

new instructions & graph- ics. no dipstick

Please dispose of used oil at proper collection centers - protect your environment

25

Page 25
Image 25
Dixon 8000 Series manual new instructions & graph- ics. no dipstick, Lubrication, Care And Maintenance