BENDIX BW2809 manual Hardware Specifications, Electrical Specifications, Power

Figure 14 Sensor not found

Specifications

Hardware Specifications

General Specifications

∙Handheld 125 kHz LF generator.

(To provide activation of SmarTire® sensors)

∙Requires replaceable “C” cell batteries (either Alkaline or NiMH)

The battery compartment is in the rear of the unit.

Battery life expectancy is approximately 300+ activations.

A Tool battery level indicator is located in the lower left hand corner of the main display screen.

Electrical Specifications

Communication Interfaces

∙RS-232 (diagnostic interface port): Used for updating the Tool and for communicating with J1939 receiver.

System Resources

∙100 sensor memory space.

Power

PARAMETERS	CONDITION	VALUE
		Three (3) “C” Cell
Supply Voltage	(Alkaline or NiMH)	Batteries, or equivalent
		NiMH rechargeable.

Page 22