9. If a sensor failed to activate, this screen will be appear:

If this occurs, ensure that the Tool is placed at the correct position around the tire and retry the sensor activation by pressing the Learn button.

10.If, while learning a particular wheel position, a tire pressure sensor ID code is received that is already used in a different position, this "Duplicate ID" error screen is displayed:

11.Pressing the button will delete the received ID and the screen will go to the previously learned position. Press the Learn button to learn the tire sensor into the position again.

12.Using the programming cable (Part Number K092501), connect the Tool to the TrailerLinkby Bendix CVS system harness. Refer to the TrailerLink system manual for instructions.

ECU

HAND

TOOL

REMOVE LED

INSERT

HARNESS

13.Press the Check button to begin downloading the new tire sensor IDs into the TrailerLinkby Bendix CVS system receiver.

Page 18

Page 18
Image 18
BENDIX BW2809 manual ECU Hand Tool Remove LED Insert Harness