CARE AND MAINTENANCE
PARKING BRAKE ADJUSTMENT
With the brake handle in the release position, remove the cotter pin from the castle nut. Insert
a 0.010 feeler gauge between the brake disc and the brake puck. | Tighten the castle nut with | |
the feeler gauge inserted until the gauge fits snugly between the disc and puck. The gap |
| |
should not be so tight that the feeler gauge cannot be reinserted after removal. Back the | castle | |
nut to the closest pin hole and reinsert the cotter pin. Repeat for other side. See | picture | |
below. |
|
|
Castle |
|
|
Nut |
|
|
.010 between Brake Disk and Brake Puck
Brake Linkage Spring
Stop
Actuating
Lever
26
