Dixon 968999515 manual Unpacking Instructions, Tools Required for Assembly, Carton Contents

UNPACKING INSTRUCTIONS

•Remove all parts and packing materials from carton.

•Check carton contents against list. Be sure all parts are there.

TOOLS REQUIRED FOR ASSEMBLY

(2)1/2" Wrenches

(1)9/16" Wrench

(1)9/16" Socket wrench

CARTON CONTENTS:

3	- Container Tops	2 - Weight Plates
3 - Container Bottoms		2 - Weight Brackets
1	- Upper Chute	4	- Bolts 3/8-16 x 3 3/4"
1	- Lower Chute	8	- Nuts 3/8-16, nyloc
1	- Catcher Mount	8	- Bolts 5/16-18 x 1", GR5
1	- Cover Assembly	4	- Bolts 3/8-16 x 3 1/2”, GR5

1 - Cast Weight

PARTS IDENTIFICATION

COVER

ASSEMBLYDUMP BAG INDICATOR

CHUTE LATCH

UPPER CHUTE

GRASS CATCHER

CONTAINERSLOWER CHUTELOWER CHUTE ATTACHING STRAPS

NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the mower in the operator’s position.

6

CAUTION

BEFORE ASSEMBLING GRASS CATCHER TO MOWER:

•Set parking brake.

•Place motion control levers in "NEUTRAL " position.

•Turn ignition key "OFF" and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug and place wire where it cannot come in contact with plug.