Assembly

1 BAGGER SUPPORT ASSEMBLY (See Figures 1A and 1B)

1.Remove rear engine guard (if installed) by removing the six bolts that attach the guard to the frame.

2.Place hitch Part No. 539113090 on the rear of the mower.

ENGINE

GUARD

BOLTS

REAR ENGINE GUARD

FIGURE 1A

3.Install two (2) previously removed bolts (539107475) thru rear of the hitch weldment.

4.Secure the sides of the hitch to the frame with four (4) bolts (539107899) and four (4) washers (539990598) two per each side.

NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting cover assembly to mower.

1.Position cover assembly on ground behind mower as shown.

2.Lift and rotate cover to align cover brackets with support assembly tubes.

3.Slide cover assembly down onto the support tubes.

COVER

ASSEMBLY

SUPPORT

ASSEMBLY

BOLT, 5/16-18 X 3/4, GR8

WASHER, 1/4

FIGURE 2

HITCH

PREVIOULY REMOVED

HARDWARE

FIGURE 1B