Dixon RAM 44, BS, BS, HON, KOH, KAW, HON Changing The Engine Oil, Oil Fill, Care And Maintenance

CARE AND MAINTENANCE

!	CAUTION	HOT oil may cause burns. Allow engine to
		cool before draining oil.

CHANGING THE ENGINE OIL

1.The “Dapco” oil drain valve is located on the left side of the engine crankcase.

2.Place a suitable container under the drain valve hose.

3.To drain, turn hex head valve stem counter-clockwise with a 10mm wrench or socket. Open to full open (approximately 7 turns).

4.After engine is drained, tighten hex stem.

5.Change oil filter.

6.Fill with oil (see steps below).

Hex Head	—Fig. 9—
Valve Stem

NOTE: Refer to engine manufacturer’s recommendations for frequency of oil changes.

OIL FILL

1.Clean any spilled oil from engine and chassis.

2.Refill engine with type, and quantity of oil recommended by the engine manufacturer in engine literature.

NOTE: Engine oil changes on the Ram Series will require replacement of the oil filter. These filters may be available from your local Dixon Dealer.

44