MAINTENANCE

Adjusting the Mower Deck

Leveling deck

Adjust the deck while the mower is on a level surface. Make sure the tires are inflated to the correct pressure. See “Technical Data” under Transmission. If tires are under or over inflated, you cannot properly adjust your deck.

Four slots control the height and pitch of the mower deck. The deck should be adjusted slightly higher in the rear.

NOTE:To insure accuracy of leveling procedure, mower deck drive belt must be installed prior to leveling deck.

1.Wear heavy gloves. Turn each outer blade tip to align with the deck or in a side-to-side manner.

2.Measure from the floor surface up to the bottom of the blade tip on the discharge side of the mower deck. Retain this measurement. Move to the opposite side, check that measurement is the same. If adjustment

is required, loosen the locknut and move mounting bolt up or down in slot until both side-to-side measurements are equal. Retain measurement.

3.Turn both outer blades to align with the deck in front-to-rear manner. Reposition rear mounting bolts up or down until rear of mower deck is positioned level to 1/8" higher in the rear than the side-to-side measurement.

4.Confirm measurements once again. Blade tips should be level in a side-to-side manner. In the rear, blade tips should be level to 1/8" higher than side-to-side measurement. In the front, blade tips should be level to 1/8" lower than side-to-side measurement.

NOTE: This will place the mower deck in a base measurement position. Additional adjustment may be required to achieve desired cut for the type of grass or conditions being mowed.

WARNING!

Before performing any service or adjustment checklist:

•Engage the parking brake.

•Place the Blade switch in the disengaged position.

•Turn ignition switch to “OFF” position and remove the key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect the spark plug wire from all spark plugs and place the wire where it cannot come in contact with the plug.

1

2

2

8050-829

1.Lift arm

2.Mounting bolts

Leveling the mower deck

42

Page 41 Page 43
Page 42
Image 42
Dixon SE 5225 KOH CE, 966057501 manual Adjusting the Mower Deck, Leveling deck
Page 41 Page 43

966057501, SE 5225 KOH CE specifications

The Dixon SE 5225 KOH CE,966057501 is an advanced piece of equipment designed for professionals seeking both power and efficiency in their operations. This model is recognized for its robust construction and innovative features, making it suitable for various applications in demanding environments.

One of the key highlights of the Dixon SE 5225 is its versatility. It is equipped with a powerful engine that delivers impressive performance, ensuring that tasks are completed efficiently and effectively. The machine is capable of handling heavy loads while maintaining stability, which is crucial for safety in operational settings.

The SE 5225 also incorporates advanced technologies that enhance its functionality. For instance, it features a state-of-the-art control system that allows for precise handling and monitoring. This ensures that users have complete command over the machine's operations, leading to increased productivity and reduced operational downtime. Additionally, the model boasts a user-friendly interface, making it accessible to operators with varying levels of expertise.

Another significant characteristic of the Dixon SE 5225 is its durability. Constructed with high-quality materials that resist wear and tear, this equipment is designed to withstand the rigors of daily use. The engineering behind the machine emphasizes not only strength but also ease of maintenance, ensuring that upkeep is straightforward and cost-effective.

Moreover, the SE 5225 is designed with safety in mind. It includes multiple safety features, such as emergency shut-off systems and protective enclosures, to minimize the risk of accidents. These aspects are crucial for operations where safety is a top priority.

In terms of efficiency, the SE 5225 excels with its fuel economy features, making it an environmentally friendly option without compromising on power. This aligns with the industry's growing emphasis on sustainable practices while maintaining the performance required for professional tasks.

In conclusion, the Dixon SE 5225 KOH CE,966057501 stands out as a reliable and efficient solution for those in need of heavy-duty equipment. Its blend of power, advanced technology, and safety features make it an ideal choice for professionals looking to enhance their operational capabilities and achieve superior results in various applications. Whether in construction, logistics, or any other demanding field, this model is engineered to deliver.
Top Page Image Contents