CONTROLS
Fuel Shut Off Valve
The fuel shut off valve is located at the left rear of the seat. The valve is off when the handle tab is turned perpendicular to the fuel line.
IMPORTANT INFORMATION
In order to obtain an even cutting height, it is important that the air pressure in all tires is 15 psi / 103 kPa / 1 bar.
IMPORTANT INFORMATION
Always raise the deck to the highest position for transport.
Cutting Height Adjuster
The deck cutting height is obtained by pressing the foot pedal forward to lift the deck. To lower the deck, apply pressure to the top side of the foot pedal and allow it to pivot while the lift arm rotates to the rear of the unit. To stop in the desired cutting position, rotate the foot pedal down into the notch in the height plate. The cutting height range is from 1½" (38mm) to 4½"
(114mm) in ¼ (6mm) increments. The heights are measured from the ground up to the blade tip with the engine not running.
Fuel shut off valve in the CLOSED position
The mower deck’s lifting lever
23
