Dixon ZTR 34, ZTR 44, ZTR 34 manual Grass Height and Cutting Suggestions

OPERATION INSTRUCTIONS

GRASS HEIGHT AND CUTTING SUGGESTIONS

Do not attempt to cut grass when it is wet.

If the grass is tall, place the mower deck cut height lever in the top or second notch. “Initially” overlap cutting swaths instead of a full swath with each pass. Some applications may require a second cutting.

Keep the underside of the mower deck clean.

Maintain sharp blades throughout the cutting season.

As a rule of thumb, never cut off more than one third of the total grass blade length. Correct mowing height can reduce weeds and disease by 50% to 80%.

The following grass cut heights are based on adequate moisture conditions and normal thatch buildup in a healthy lawn. Some locations and applications may require slightly different cut heights. If in doubt, consult your local lawn professional for assistance.

Grass Types	Best Cut Heights
Bermudagrass	1 - 2"	(25-51 mm)
Bluegrass	2 - 3"	(51-76 mm)
Buffalograss	1½ -3" (38-76 mm)
Ryegrass	2 - 3"	(51-76 mm)
Tall Fescue	3-3½"	(76-89 mm)
Zoysiagrass	1 - 3"	(25-76 mm)

32