Dixon ZTR 34, ZTR 44, ZTR 34 manual To Set Park Brake, Controls

CONTROLS

PARK BRAKE

The park brake is designed to hold the mower from moving and is not intended for use in stopping the mower while it is in motion. The engine will stop if the park brake is engaged while the control levers are in the drive position.

! CAUTION	Engage park brake before
	starting engine.

TO SET PARK BRAKE

The hand-operated park brake is located on the
operator’s left.	—Fig. 3—

•To engage brake, pull lever up (to the rear).

•To release brake, move lever forward (down).

NOTE: Always set park brake before dismounting.

Release park brake before moving mower.

The pressure required to operate the mower is very light.

20