Lexmark MS310DN, 35ST101, 220 manual Print is too light, Troubleshooting 173

Troubleshooting 173

Print is too light

ABC

DEF

Action	Yes	No
Step 1	Go to step 2.	The problem is solved.

aFrom the Quality menu, increase the toner darkness. To access the Quality menu, do either of the following:

•If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Printer Settings > Quality Menu.

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section.

•If the printer is connected to a computer by a USB or parallel cable, then open the Local Printer Settings Utility for Windows or Printer Settings for Macintosh.

Note: 8 is the factory default setting.
b Resend the print job.
Is the print still too light?
Step 2	Go to step 3.	Change the paper type,
a From the Paper Menu, check if the paper type, texture, and weight		texture, and weight to
match the paper loaded in the tray. To access the Paper Menu, do		match the paper
either of the following:		loaded in the tray.

•If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu.

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section.

•If the printer is connected to a computer by a USB or parallel cable, then open the Local Printer Settings Utility for Windows or Printer Settings for Macintosh.

bResend the print job.

Is the tray set to the type and weight of the paper loaded?