Lexmark 35ST101, MS310DN, 220 manual PostScript menu, PCL Emul menu

Understanding the printer menus		70
	Use	To
	Enhance Fine Lines	Enable a print mode preferable for files such as architectural drawings, maps, electrical
	On	circuit diagrams, and flow charts.
	Off	Notes:
		• Off is the factory default setting.
		• You can set this option from the printer software. For Windows users, click File >
		Print, and then click Properties, Preferences, Options, or Setup. For Macintosh
		users, choose File > Print, and then adjust the settings from the Print dialog and
		pop‑up menus.
		• To set this option using the Embedded Web Server, type the network printer IP
		address in the Web browser address field.
	Gray Correction	Automatically adjust the contrast enhancement applied to images.
	Auto	Note: Auto is the factory default setting.
	Off
	Brightness	Adjust the printed output either by lightening or darkening it. You can conserve toner
	‑6 to 6	by lightening the output.
		Note: 0 is the factory default setting.
	Contrast	Adjust the contrast of printed objects.
	0–5	Note: 0 is the factory default setting.

PostScript menu

Use

Print PS Error

On

Off

To

Print a page containing the PostScript error.

Note: Off is the factory default setting.

PCL Emul menu

Use	To
PCL Emulation Settings	Specify the orientation of text and graphics on the page.
Orientation	Notes:
Portrait
	• Portrait is the factory default setting. Portrait prints text and graphics
Landscape
	parallel to the short edge of the page.
	• Landscape prints text and graphics parallel to the long edge of the page.
PCL Emulation Settings	Specify the number of lines that print on each page.
Lines per Page	Notes:
1–255
	• 60 is the US factory default setting. 64 is the international default setting.
	• The printer sets the amount of space between each line based on the
	Lines per Page, Paper Size, and Orientation settings. Set Paper Size and
	Orientation before setting Lines per Page.