Lexmark 220, 35ST101 manual Print Settings, Setup menu, Printer Language, Print Area, Resource Save

Understanding the printer menus 67

Print Settings

Setup menu

Use	To
Printer Language	Set the default printer language.
PCL Emulation	Notes:
PS Emulation
	• PCL Emulation is the factory default setting.
	• PCL Emulation uses a PCL interpreter for processing print
	jobs.
	• PS Emulation uses a PostScript interpreter for processing
	print jobs.
	• Setting a printer language default does not prevent a
	software program from sending print jobs that use another
	printer language.
Print Area	Set the logical and physical printable area.
Normal	Notes:
Whole Page
	• Normal is the factory default setting. Normal allows the
	printer to use the PCL- and PostScript-defined printable
	regions and logical page sizes.
	• Whole Page allows the image to be moved outside the
	Normal-defined logical page area. However, if the user prints
	any data in the non-printable area, then the printer clips the
	image at the boundary defined by the Normal setting. This
	setting affects only pages printed using a PCL 5 interpreter
	and has no effect on pages printed using the PCL XL or
	PostScript interpreter.
Resource Save	Specify how the printer handles temporary downloads, such as
On	fonts and macros stored in the RAM, when the printer receives a
Off	print job that requires more than the available memory.
	Notes:
	• Off is the factory default setting. Off sets the printer to retain
	downloads only until memory is needed. Downloads are
	deleted in order to process print jobs.
	• On sets the printer to retain downloads during language
	changes and printer resets. If the printer runs out of
	memory, then the Memory Full [38] error message
	appears, but downloads are not deleted.