Lexmark 220, 35ST101, MS310DN manual Tray Renumber

Understanding the printer menus		71
	Use	To
	PCL Emulation Settings	Set the printer to print on A4‑size paper.
	A4 Width	Notes:
	198 mm
		• 198 mm is the factory default setting.
	203 mm
		• The 203‑mm setting sets the width of the page to allow printing of eighty
		10‑pitch characters.
	PCL Emulation Settings	Specify whether the printer automatically performs a carriage return (CR) after
	Auto CR after LF	a line feed (LF) control command.
	On	Note: Off is the factory default setting.
	Off
	PCL Emulation Settings	Specify whether the printer automatically performs a line feed (LF) after a
	Auto LF after CR	carriage return (CR) control command.
	On	Note: Off is the factory default setting.
	Off
	Tray Renumber	Configure the printer to work with printer software or programs that use
	Assign MP Feeder	different source assignments for trays and feeders.
	Off	Notes:
	None	• Off is the factory default setting.
	0–199
		• None cannot be selected. It is only displayed when it is selected by the
	Assign Tray [x]
		PCL 5 interpreter. It also ignores the Select Paper Feed command.
	Off
		• 0–199 allows a custom setting to be assigned.
	None
	0–199
	Assign Manual Paper
	Off
	None
	0–199
	Assign Manual Env
	Off
	None
	0–199
	Tray Renumber	View the factory default setting assigned to each tray or feeder.
	View Factory Defaults
	MPF Default = 8
	T1 Default = 1
	T1 Default = 4
	T1 Default = 5
	T1 Default = 20
	T1 Default = 21
	Env Default = 6
	MPaper Default = 2
	MEnv Default = 3