Lexmark 35ST101, MS310DN, 220 manual Standard network software error, Troubleshooting 136

Troubleshooting 136

‑ On

If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of the following:

•From the printer control panel, press to continue printing.

Note: The printer discards any data received through the parallel port.

•Set the Parallel Buffer to Auto.

–If the printer is on a network, then access the Embedded Web Server.

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP section.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > Network/Ports > Parallel.

3In the Parallel Buffer field, enter 2.

4Click Submit.

–If the printer is connected to a computer by a USB or parallel cable, then access the Parallel menu through the Local Printer Settings Utility for Windows or through Printer Settings for Macintosh.

Standard network software error [54]

‑ On

‑ On