OPERATION INSTRUCTIONS
STARTING INSTRUCTIONS (engine has been operated):
1.Operator must be seated in normal operating position.
2.Set parking brake.
3.Push throttle control lever to 1/4 to 1/2 setting.
5.Insert ignition key and turn to “start” position. When engine starts, release ignition key. Key will return to “run” position.
6.Move throttle control lever to the wide open or maximum setting for actual operation of the mower deck.
Note: Model 6023 may require partial choke setting to insure adequate engagement of the mower deck. As engine warms, open choke lever.
7.Engine must be operated at wide open or maximum setting to insure adequate lubrication, cooling and cut quality of the mower deck.
Note: 6000 Series mowers will require a slightly longer
CAUTION Do not operate the engine in an enclosed area due to the harmful exhaust gas produced.
Notes: On initial operation, set throttle at slow speed.
Engine cannot be restarted when blades are engaged.
Safety switches stop engine when operator leaves seat while mower blades are engaged.
Always turn engine off when leaving mower.
21
