Dixon 13090-0601, ZTR 6023 manual Specifications, Series Forward Mount

	SPECIFICATIONS
	6000 Series Forward Mount
CHASSIS:	Sheet metal construction frame.
BODY:	Folded sheet metal. Seat lifts up for access to battery and belt service.
SEAT:	Designed for operator comfort by use of high density closed cell foam
	padded back and arm rests, upholstered with CorduraTM water-
	repellent fabric. Seat is adjustable fore and aft.
MOWER DECK:	Two decks are available. Both are made of 12 GA fabricated welded
	construction with 10 GA reinforcement plate. Three blades
	combine for either a 48” or 60” cut width. Cut height approximately 1”
	to 5” via 9 position lift handle.
BLADE DRIVE:	Electric clutch.
DRIVE SYSTEM:	Each rear wheel is independently driven by a HydroGear BDU-10L Series
	70 hydrostatic transmission. The hydrostatic transmissions, in turn,
	power a fully enclosed HydroGear gearbox.
ENGINE:	23 HP Kohler Command, 4-cycle, v-configuration, overhead valve, air
	cooled, gasoline, horizontal shaft, aluminum head, and crankcase with
	cast iron liners, full pressure lubrication/full flow filter, pulse-type fuel
	pump, fixed jet carburetor w/smart-choke, electronic ignition, in-line fuel
	filter, dual element air cleaner.

STARTING SYSTEM: Electric by key switch operation with safety interlocks on parking brake and blade drive clutch.

TIRES:	Front 4.10 x 3.50-4
	Rear 6.00 x 13.00-5
	Drive 10.0 x 10.00-20
RECOMMENDED	Front	16 lbs.
TIRE PRESSURE:	Rear	12 lbs.
CAPACITIES:	Fuel - 5 gallons
	Hydrostat oil tank - 3 quart with in-line 40 micron filter
	Hydrostat oil recommendation, refer to page 29
	Engine - 2 quarts SAE 10W30 (with filter)
DIMENSIONS:	Width	57-1/2”(48” Deck) 69-1/2” (60” Deck)
	Height	45-1/2”
	Length	96” (48” Deck), 101” (60” Deck)
	Weight	960 lbs. (48” Deck), 1030 lbs. (60” Deck)

Additional information provided in service instructions under the individual component.

13