Dodge SP600 Series specifications Sheet

SHEET	SP600AC DRIVES
DATA	SP600 Series of AC
	Drives from 0.5 to 200
	Horsepower
	A full-featured industrial AC drive
	suitable for wall, machine, flange, and
	washdown mounted installations
	The SP600 provides the benefits of
	more expensive full-featured drives in a
	compact, versatile, and cost effective
	design. Multiple enclosure/packaging
	options along with a drive mounted
	graphical keypad and embedded
	braking circuitry make this drive very
	versatile. The wide range of network
	options available for this product will allow
	you to maximize data acquisition, speed
	control and application flexibility.

• Terminal Block Control
- 6 configurable digital inputs
-	Up to 8 pre-set speeds
-	Start/Stop, Forward/Reverse,Auto/Manual,
	Jog, Preset Speed, Function Loss, ProcessPI

Aggregate/Cement

✓Food

Mining

✓Forest/Paper

✓Petro/Chem

✓Unit/BaggageHandling

✓HVAC/IndustrialHandling Air

✓Environmental/FluidPower

✓Automotive

Metals

Features/Specifications

•Control Modes

-Volts/Hertz

-Sensorless Vector Control

Each method can operate either a single or multi-motor application from one SP600. SVC is limited to mechanically coupled identical motors.

•Input Voltages/Power Ratings

-200, 208, 240 (0.5 to 10 HP)

-380, 400, 415, 480 (0.5 to 200 HP)

-575 (0.5 to 150 HP)1

•Switching Frequency

-Full HP rating at 50°C for (45° for 50 HP; 40° for 200 HP):

•4 kHz Frames A - D

•4 kHz Frames 2 -5

•4 kHz Frame 6 (2 KHz for 200 HP)

-Derating may apply for higher switching frequencies

•Zero-stacking (side by side) panel mounting possible for all frames.

		Control, etc.
	-	2 Analog inputs
	-	1 Analog output
	- 2 Relay outputs, form C contacts.
•	Drive Serial Interface
	- PC configuration and monitoring of a single
		drive or multiple drives when using V*S Utilities
		Software.
•	Overload Protecting
	- Intelligent Thermal Management (ITM™) system
		can reduce carrier frequency or trip the drive in
		overtemp conditions.
	- UL and NEC approved electronic motor
		overload protection.
•	Enclosures/Mounting
	- Wall or machine mount NEMA 1 (IP20)
	- Flange mount NEMA 1 (IP20)
	- See RAPS-958-2 for NEMA 4x/12
• Internal Braking transistor as standard (optional
	Frames 4, 5, and 6) requires optional drive
	mounted or externally mounted braking resistor
	- Drive mounted resistor available for Frames A,
		B, C, D, and 2

1575 VAC models are UL and cUL only