Control ESP OFF, Digit Timeout | Dolby Laboratories RC2888/01

CONTROL
ESP	OFF
DIGIT TIMEOUT	3 . 0
3 DIGIT ENTRY	NO
SOURCE MENU ITEM	NO
PIC FMT MENU ITEM	NO
CHANNEL GUIDE	NO
MIN VOLUME	10
MAX VOLUME	35

•The ESP (Energy Saving Programmability) option allows you to select a specified period of time (from 1 HR / 2 HR ......... / 99 HR) to power down your TV automatically. If it does not receive any commands during this period from the remote control or the TV keyboard, this energy saving feature will take effect.

D Note: If a remote or keyboard command is received before the ESP time period expires, the Timer will reset and begin counting down again.

CONTROL
ESP	2
DIGIT TIMEOUT	3 . 0
3 DIGIT ENTRY	NO
SOURCE MENU ITEM	NO
PIC FMT MENU ITEM	NO
CHANNEL GUIDE	NO
MIN VOLUME	10
MAX VOLUME	35

•The DIGIT TIMEOUT option allows you to specify a time period (from 1 to 9.9 seconds) for the channel to switch to another channel when you key in the channel number. It is advisable not to specify too short a time period especially when you want to key in 2 or 3 digit channel numbers.

D Note: The recommended and default setting is 3.0 seconds.

28

CONTROL
ESP	2
DIGIT TIMEOUT	3 . 0
3 DIGIT ENTRY	NO
SOURCE MENU ITEM	NO
PIC FMT MENU ITEM	NO
CHANNEL GUIDE	NO
MIN VOLUME	10
MAX VOLUME	35

•Select YES to enable channel selection of 1 to 250 for cable mode and 2 to 250 for antenna mode. Select NO to enable channel selection from 1 to 99 for cable mode and 2 to 99 for antenna mode.

CONTROL
ESP	2
DIGIT TIMEOUT	3 . 0
3 DIGIT ENTRY	YES
SOURCE MENU ITEM	NO
PIC FMT MENU ITEM	NO
CHANNEL GUIDE	NO
MIN VOLUME	10
MAX VOLUME	35

•SOURCE MENU ITEM allows you to remove Source from the options menu the guest can see.The guest will not have access to any inputs not mapped to a channel in this case.

•If YES is selected, Source will appear in the options menu. If you select NO, Source will not appear.

CONTROL
ESP	2
DIGIT TIMEOUT	3 . 0
3 DIGIT ENTRY	NO
SOURCE MENU ITEM	YES
PIC FMT MENU ITEM	NO
CHANNEL GUIDE	NO
MIN VOLUME	10
MAX VOLUME	35

Image 28

Dolby Laboratories RC2888/01, RC2573GR Control ESP OFF, Digit Timeout, Digit Entry YES, Source Menu Item YES

Contents

Table of Contents Important safety instructions Read Before Operating Equipment Know these safety symbols U T I O N Safety information and useful tips Pull the power lead by the plug do not pull by the wire Before calling service Symptoms Suggested steps Configuring the control options on Deselect HM Link in the Communication Antenna connection Switching on the TVMains connection Overview of TV Connectors and controls Menu Spdif RC2573GR Optional remote controlsRC2888/01 Description of guest remote control Setup Overview of TV menus Accessing the setup menu Accessing TV Setup Menu using the Remote Control RC2573GRSlide the button to the Setup location To scroll through the menu Installation Selecting the languageSelecting the communication source SP SPI SP I2C Changing the settings of a channel Press Æ to enter the Channel Install menuChannel Install Select a Channel TUNER,AV, SVIDEO, CVI, VGA, HDMI1, HDMI2, CARD-CVBS Side Svideo Press 0 9 to key in the channel number 1 to Selecting your Preferred RingNaming a channel Selecting the Mute Source Selecting cable or antenna mode Select YES to use Cable mode and no to use Antenna modeAuto Install TV Cable Tuning YES Setting options for digital channels To enable Current RING, select from RING1 to RING4Press Æ to enter the Digital Setup mode Selecting a virtual or physical channel Setting up the Vchip / Digital Rating and Factory CH Reset Press Æ to enter the Channel Setup modePress Æ to enter the Audio mode Selecting the Digital Audio language Select on option to enable Emergency Alert Activating the Emergency Alert Specifying the conﬁguration when switching on TV Press Î ï to select the item you want to configurePress Î or ï to select the item you want to configure Channel Display FullscreenSound Press ï and select Security Press ï to select Remote Control LockPress Æ to enter the Security menu Press ï to select Decryption ControlPress Æ to enter the Decryption Control menu Press Æ to start conversion Using V-Track to watermark Time Setting option allows you to manually enter the timePress Æ to enter the Vtrack menu Conﬁguring the control options Digit Timeout Control ESP OFFControl ESP Digit Entry YES Conﬁguring the features options and settings Press Æ to enter the Video Adjustment menuPress Æ to enter the Features menu Select and configure the settings and options for Select Smart Sound to listen to different Smart Sound modes Software downloading and cloning Select SW Download USB Source ALL Clone Data SSB NVMStandby Firmware only download Iboard NVM USB device RF Source ALL SSB NVM SW Download SourceCC / V-CHIP CC / V Chip Save CC Digital CC Mode option Analog CC Mode option, itOFF and on Mute V-CHIP Menu Item option Conﬁgure Ambilight 10.10Change Ambilight settingsCOLOR, RELAXED, MODERATE, Dynamic LOW, MED and High CustomPress to exit Support for multiple remote controls Programming the Multi Remote Controls functionAppendix a Communication Definitions, acronyms and abbreviations Cvbs OSD STB Philips F1rst Choice Limited Warranty USA limited warrantyPhilips’ Commercial Television What WE will do to Correct PROBLEMS? Page Just a phone call away Environmental care Cleaning and careDo not rub with dust clothes containing chemical treatment Index Page Page Kensington Security Slot Dolby DigitalIf present