Method of operation

–Only use the Edging trimmer in good light and visibility. During the winter season beware of slippery or wet areas, ice and snow (risk of slipping). Always ensure a safe footing.

–Never work on unstable surfaces.

–Remove sand, stones, nails etc. found within the working range. Foreign particles may damage the cutting tool and can cause dangerous kick-backs.

–Before commencing cutting, the cutting tool must have reached full working speed.

Cutting Blade

Employ only the correct cutting blade for the job in hand.

Inspect the entire unit for loosing, missing and damage of the parts (especially the cutter blade). Never use cracked, deformed or damaged cutting blade.

Maintenance instructions

–The condition of the cutter of the protective devices and also of the shoulder strap must be checked before commencing work. Particular attention is to be paid to the cutting blade which must be correctly sharpened.

–Turn off the engine and remove spark plug connector when replacing or sharpening cutting blade, and also when cleaning the cutting blade.

Never straighten or weld damaged cutting tools.

–Operate the Edging trimmer with as little noise and contamination as possible. In particular check the correct setting of the carburetor.

–Clean the Edging trimmer at regular intervals and check that all screws and nuts are well tightened.

–Never service or store the Edging trimmer in the vicinity of naked flames.

–Always store the Edging trimmer in locked rooms and with an emptied fuel tank.

Observe the relevant accident prevention instructions issued by the relevant trade associations and by the insurance companies.

Do not perform any modifications on the Edging trimmer as this will endanger your safety.

The performance of maintenance or repair work by the user is limited to those activities as described in the instruction manual. All other work is to be done by an Authorized Service Agent. Use only genuine spare parts and accessories released and supplied by DOLMAR.

Use of non-approved accessories and tools means increased risk of accidents.

DOLMAR will not accept any liability for accidents or damage caused by the use of non-approved cutting blade and fixing devices of cutting blade, or accessories.

First Aid

In case of accident make sure that a first-aid box is available in the vicinity of the cutting operations. Immediately replace any item taken from the first aid box.

When asking for help, please give the following information:

–Place of accident

–What happened

–Number of injured persons

–Kind of injuries

–Your name

Packaging

The DOLMAR Edging trimmer will be delivered in two protective cardboard boxes to prevent transport damage. Cardboard is a basic raw material and is therefore consequently reusable or suitable for recycling (waste paper recycling).

5

Page 4 Page 6
Page 5
Image 5
Dolmar PE-251 Method of operation, Cutting Blade, Maintenance instructions, Never straighten or weld damaged cutting tools
Page 4 Page 6

PE-251 specifications

The Dolmar PE-251 is a versatile and powerful chainsaw designed for both professional and amateur use. Known for its reliability and robustness, this chainsaw is particularly well-suited for light to medium-duty tasks, making it an excellent choice for homeowners, gardeners, and small-scale forestry operations.

One of the standout features of the Dolmar PE-251 is its lightweight design, which enhances maneuverability and reduces user fatigue. Weighing in at just around 5.5 kg, it enables longer operating periods without compromising performance. The engine, with a displacement of 25.4 cc, delivers a high power-to-weight ratio, ensuring that users can tackle a range of cutting tasks, from trimming branches to felling smaller trees.

The Dolmar PE-251 is equipped with an advanced 2-stroke engine that not only provides exceptional power but also features low emissions, aligning with contemporary environmental standards. This technology ensures that users can work efficiently without contributing excessively to air pollution. The engine operates smoothly, thanks to a well-designed intake and exhaust system that optimizes fuel and air flow.

Another significant characteristic of the PE-251 is its easy-start mechanism, which features a primer bulb and a precision-engineered recoil starter. This technology reduces the effort required for starting the machine, allowing users to get to work quickly. Additionally, the chainsaw incorporates an adjustable oil pump that allows for accurate lubrication of the chain, enhancing performance and prolonging the life of the saw.

Safety is a priority with the Dolmar PE-251, evident in its built-in safety features. The chainsaw includes a chain brake, which can be activated instantly to stop the chain in case of kickback, a common hazard during cutting tasks. Furthermore, the handle is ergonomically designed for a comfortable grip, providing better control and reducing the risk of accidents.

In conclusion, the Dolmar PE-251 is an excellent choice for users seeking a reliable, lightweight chainsaw with innovative features that enhance performance and safety. Whether for maintaining a garden, undertaking landscaping projects, or dealing with storm damage, this chainsaw delivers efficiency and ease of use, making it a valuable addition to any toolkit.
Top Page Image Contents