Dometic 3000 Series owner manual Important Information Before Operation, Toilet Controls

IMPORTANT INFORMATION BEFORE OPERATION

1.	Fill freshwater tank and add deodorant to holding tank through toilet bowl.
2.	Make sure all guests understand the operation of the toilet system and the
		®
	flushing instruction label is easy for guests to read. This label is located
	under the seat, and is easily read when the seat is raised.

3.Shut off the toilet system before servicing and do not leave the vehicle with toilet system circuit breaker on.

4.Never use drain openers, alcohol, solvents, etc. in the toilet.

5.If the toilet does not function properly, refer to the Troubleshooting

section of this manual and repair as necessary. If problem persists, contact your local SeaLand product dealer or see the Customer Service section of this manual.

FLUSH and FORGET® OPERATION

1.To add water to the toilet before using (if necessary), raise flush handle until desired water level is reached. (Water flow will stop automatically after a pre- programmed period of time).

2.To flush toilet, press flush handle down. Water will flow into bowl for two seconds, then flush ball will open. Toilet will not flush again until water refill cycle is complete.

3.Do not dispose of sanitary napkins or other non-dissolving items in toilet, such as facial tissue or paper towels. These items can cause plugging of the system.

TOILET CONTROLS

ACCESS COVER

ADD WATER

TO BOWL

OFF

CONTROL SWITCHES

FLUSH HANDLE

OFF

FLUSH Figure 1

3