CENTRAL RV VACUUM

2.Flush Mount installation

a. To reach with vacuum hose as far as possible, choose a wall or surface that is centrally located and has a nearby 110 Volt AC power connection. The vacuum cleaner requires 3-7/8” wall depth (measured from the front of the wall).

!WARNING

There may be electrical wiring in the wall. Disconnect AC power cord and the positive

(+)12 volt DC terminal at the supply bat- tery. Failure to follow this instruction may create a shock hazard causing death or se- vere personal injury.

b.Attach paper template with tape to wall or sur- face a minimum of 6“ above the floor, if mounted in a vertical position. This will allow sufficient clear- ance for exhaust air. See FIG. 2.

FIG. 2

WALL

TAPE TEMPLATE

 

TO WALL

CUT OUT

 

 

 

OPENING

 

 

7-3/4” x 15-7/8”

 

 

 

 

FLOOR

6” MIN

 

 

CLEARANCE

 

 

c.Tape the template to the mounting surface of the desired location. The bottom of the cut out must be the minimum of 6” above the floor.

d.Center punch all of the circles with an awl or nail. Remove the template. Draw a line connecting the circles using a pencil and straight edge. This will outline an area 7-3/4” x 15-7/8” that is to be cut out.

e.Drill the 4 corner marks with a 1/16” drill bit, then saw out the opening. Be sure to follow the line as the mounting holes are close to the edge of the cut out.

Note: Instructions also printed on paper template.

f.Place the vacuum cleaner upside down with its’ back towards you. Remove the 2-3/4 ”x 1-3/8” cover plate on the vacuum cleaner. Install 16 AWG cable (rated at 900 C) to the unit.Use nonmetallic sheathed cable with ground (Romex) or flexible metal conduit with ground, to electrical outlet. (Check your local electrical code.) Make the connection through the Romex clamp (do not pinch wiring). Replace cover plate.

g.Test unit for operation before installing. Check to be sure vacuum cleaner bag, motor filter, exhaust filter and gate are in place. See Operating Instruc- tions, Steps D, E, and F. Slide the unit , bottom first into the opening and secure to wall with the 4 wood screws.

Note: Never use vacuum cleaner without dust bag or motor filter in place.

Note: Optimal installation uses 6 wood screws instead of 4 to reduce risk of loosening due to road vibration.

C.GROUNDING INSTRUCTIONS - EXTERNAL MOUNT

1.This appliance must be grounded. If it should mal- function or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. See FIG. 3.

D.GROUNDING INSTRUCTIONS - FLUSH MOUNT

2.For permanently connected appliances, (in-wall in- stallation) this appliance must be connected to a grounded metal permanent wiring system; or an equipment-grounded conductor must be run with

!CAUTION

To avoid possible electrical shock, be sure that electricity is turned off at the main switch or circuit breaker.

FIG. 3

the circuit conductors and connected to the equip- ment grounding terminal or lead on the appliance. Note: All wiring must comply with the National Elec- trical Code ANSI/NFPA 70-(latest edition); or CSA Standard C22.1, Canadian Electric Code, Parts 1 and 2; and any applicable local codes.

4

Page 3 Page 5
Page 4
Image 4
Dometic 9093200-(X)PR, 9093100-(X)PR To Wall, CUT OUT Opening, Floor, Clearance, Grounding Instructions External Mount
Page 3 Page 5

9093200-(X)PR, 9093100-(X)PR specifications

The Dometic 9093200-(X)PR and Dometic 9093100-(X)PR are industry-leading portable refrigerators designed for adventurers and outdoor enthusiasts who require reliable cooling solutions in remote locations. These high-performance units are engineered to cater to the needs of campers, tailgaters, and road trippers, making them essential companions for any journey.

One of the standout features of both models is their innovative compressor technology, which provides efficient cooling while consuming minimal energy. This allows users to maintain optimal temperatures for perishable goods without draining their vehicle’s battery or depleting the power source. The Dometic 9093200-(X)PR boasts a cooling range of up to 30°F below ambient temperature, which ensures that food and beverages stay fresh even in hot weather conditions.

Both models are equipped with a user-friendly digital display that allows easy temperature adjustment and monitoring. This feature enables users to set their desired cooling levels quickly, ensuring a hassle-free experience. Additionally, the models incorporate a dual-zone design, allowing for separate temperature controls for various compartments. This versatility is particularly beneficial for sorting food and beverages, making access convenient.

Durability is another key characteristic of the Dometic 9093200-(X)PR and 9093100-(X)PR. The robust construction of these refrigerators ensures they can withstand the rigors of outdoor use. With sturdy handles and rubberized corners, they are built to handle bumps and jolts during travel. Moreover, their anti-slip base provides stability on uneven surfaces, minimizing the risk of spills.

Both models also offer versatile power options, enabling users to connect to standard AC outlets or DC vehicle power sources. This adaptability makes them suitable for use not just in cars and RVs but also in cabins or other outdoor setups.

To further enhance user experience, Dometic includes features such as integrated LED lighting, ensuring visibility in low-light situations. The refrigerators prioritize quiet operation, allowing for a peaceful environment during camping trips or night-time lounging.

In summary, the Dometic 9093200-(X)PR and 9093100-(X)PR are exceptional portable refrigeration units that combine cutting-edge technology, durability, and user-friendly features. With their energy-efficient compressor, dual-zone functionality, and robust design, they serve as reliable partners for all your outdoor expeditions. Whether you are cooling food for a long road trip or chilling drinks at a campsite, these refrigerators provide high-performance cooling solutions tailored to adventurers' needs.
Top Page Image Contents