English
Operation
Hands free function
Hands free allows calls to be made without having to hold the handset.
1.Dial the required telephone number.
2.Press q to activate the hands free function. The conversation can then be heard on the loudspeaker.
3.Place the handset on a hard flat surface, e.g. a table.
4.Speak towards the microphone on the lower front edge of the handset (max 1 metre away).
5.The speaker volume may be adjusted during a call using {/}.
6.To switch to normal handset conversation press q.
7.Press L to terminate the call.
Please note!
Please remember that in hands free mode it is only possible for one person at a time to talk. The switchover between speaker and microphone is automatic and dependent on the sound level of the incoming call and the microphone. It is therefore essential that there are no loud noises noises, e.g. music, in the immediate vicinity of the telephone, as this will disrupt the hands free function.
Paging
Press 4 on the base unit to activate the paging signal on the handset. This function is used to help locate the handset or to page the person carrying the handset. The signal will stop automatically after a while or if the Lbutton on the handset is pressed. The page can also be cancelled by pressing 4 on the base unit again.
www.doro.com | 11 |
