English
Installation
Only for models with an extra handset (+1):
8.Connect the charger’s mains adapter to an electrical socket, and to the socket on the charger.
9.Carefully remove the handset battery cover. Insert the batteries into the handset ensuring correct battery polarity is observed, and replace the battery cover.
10.Put the extra handset in the charger, with the keypad facing outwards.
11.Leave the handset to charge for 24 hours before using it for the first time.
IMPORTANT!
Only use with the supplied power adaptor/s.
Please note!
Under power failure conditions the telephone will not work. Please ensure that a separate telephone not dependant on local power is available for emergency use. The earpiece may attract small ferromagnetic objects such as staples and pins, care should be taken when placing the handset near these items In order to conserve battery power, the display is very dark in standby mode. Press k once to switch it on. Do not place the base unit close to other electrical equipment such as TV sets, computer screens, telecom equipment, fans, etc. This will minimise the risk of interference. Do not place the base unit in areas where it will be exposed to direct sunlight or other major heat sources!
www.doro.com |
